# Question: What Size Fuse Do I Need For A 2000 Watt Inverter?

## How many watts inverter do I need?

Volts (120) x Amps = Watts For example if your DVD player draws 100 watts and your laptop another 100 watts, a minimum 300-watt inverter is recommended.

If the item is motor driven, it requires additional start-up (surge) wattage (typically 2-3 times the continuous wattage required) to start the device..

## Do I need to fuse my inverter?

If a short develops in your AC/DC inverter for instance, a fuse between it and the battery will prevent a possible explosion of the battery and it will cut the circuit fast enough to prevent the wires from catching fire or getting dangerously hot.

## What will a 3000 watt power inverter run?

3000 Watt inverters are heavy duty devices capable of running power-hungry appliances like washing machines, microwaves and hair dryers. Thus, these are ideal power sources for camping sites, RVs and providing back up power to homes in case of emergencies.

## What is an ANL fuse?

The WindyNation ANL Fuse Holder with fuses are used in electrical systems in which the fuse is designed to burn out when the current exceeds the safe limit for the device being protected by the fuse. It is the end user’s responsibility to determine the appropriate fuse size for the electrical circuit.

## What size fuse do I need for my inverter?

Recommended Inverter Cable and Breaker or Fuse SizesInverter VoltageContinuous WattsFuse Size (DC Amps)12 Volt600808001101000200150030017 more rows

## How do I know what size fuse to use?

Find the size of fuse by multiplying the amps required by the device (2) by 1.5. 2×1.25 = 2.5 then we will round up to the nearest fuse size (in multiples of 5 amps) which would call for a 5 amp fuse. Cross Reference that fuse size to verify that it’s below the Maximum fuse size called out by this chart.

## Will a 1000 watt inverter run a coffee maker?

I recommend the Power Inverter 1000 Watts with Three AC Receptacles # WC3720 which is rated for up to 1,000 lbs continuous power and 2,500 watts peak surge. It will run a coffee grinder too, although running both at the same time may not work because of wattage draw.

## What can you power with 1500 watts?

Typically you will be able to operate a few 100 Watt light bulbs, charge your laptop (~100 W), your cellphone (~20 W), operate ceiling fans (~100), television (~40 W) and an energy-efficient refrigerator (~800-850 W) with a 1500 W inverter.

## How many amps does a 2000 watt inverter draw?

If you max out the inverter at 2000 watts, you are pulling 2000 watts /12 volts = 166.6 DC amps per hour. If you use a 200 amp 12 volt battery you would divide 200 amp battery / 166.6 amps = 1.2 hours of run time.

## Do I need an inline fuse for my inverter?

The fuse in the inverter is for overload protection which is a much different scenario. Size the fuse based on the cable/run length and make sure it is high enough the inverter draw won’t blow it. The overload fuse in the inverter handles that condition. The inline fuse protects the van and wiring etc.

## How many batteries are needed for a 2000 watt inverter?

Now come to batteries, a 2000 watts inverter usually needs 24 volts to generate power. 2 batteries of 12 volts 200AH (you can use other capacity too) in series connection needed and out of them you would be able to use 100 AH x 24 volts that is 2.4kWh.

## How much power does a 1500w inverter use?

If you were to load the inverter to its maximum of 1500 Watts and consider an efficiency of around 80% you would be using about 156 Amps from a nominal 12 Volt source. In reality a 1500 Watt inverter often cannot supply the full rating into all loads so your current draw would likely be less.

## What size fuse should I use for a 2000 watt inverter?

A 2000 watt inverter means it delivers 2000 watts @ 120 volts. 2000/120=16.66 amps. A 20 amp fuse is correct, not 200. A 200 will burn the truck down.

## What size wire do I need for a 3000 watt inverter?

1/0 AWG battery cables should be used on power inverters rated up to 3500 watts and most commonly used on 2000, 2200, 2500, 3000, 3300 and 3500 watt inverters.